|Place of Origin:||China|
|Minimum Order Quantity:||1|
|Delivery Time:||30 working days|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||100sets per year|
|Lead Time:||60 Days||Max. Lifting Height:||28.5m|
|Rated Lifting Moment:||40tm||Warranty:||1 Year|
|Voltage:||380v/50HZ(Customer Design )||After-sales Service Provided::||Field Installation, Commissioning And Training, Field Maintenance And Repair Service, Online Support|
marine knuckle boom crane,
knuckle jib crane
Knuckle and knuckle telescopic boom marine cranes
End User Advantages
1. Compact design with minimum height, width and length
2. Small footprint, for easy installation onboard
3. Delivered as one complete unit ready for installation to vessels
4. Easy access for periodic maintenance, service and repair, support by with clear labelling and detailed manuals
Each crane is supplied with a pedestal which should be welded onto the ship’s steel structure or counter foundation. The pedestal consists of a steel pipe and a flange on which the crane housing with its slewing ring is placed.
The pedestal has been provided with a man hole and hatch cover for easy access of the electric connections. The diameter of the pedestal will be determined for each individual project since this diameter depends on the maximum workload and maximum outreach of the crane. As a standard the pedestal is delivered with a total height of 1000 mm.
Upon request alternative pedestal dimensions are possible against additional cost.
The KB cranes are all delivered with a high quality slewing ring. This slewing ring is mounted in between the crane housing and pedestal by means of high strength structural bolts and nuts which are tightened to a certain torque. The exact torque will be specified by OUCO and can be found on the general arrangement drawing of the crane.
The crane housing or tower forms the main steel structure of the crane. It has been built up from special grade steel plates to a stiff rigid superstructure, incorporating the brackets to support the crane’s jib and hydraulic cylinder(s).
The bearings to support the crane’s jib are so-called self lubricating plain bushings. The bearings for the hydraulic cylinders are of the spherical type
The crane housing also contains the hydraulic oil tank accessible by hatches. It also contains all
necessary provisions for fastening of the slewing drives and hydraulic components. The bottom of the
crane housing consists of a flange to which the slewing ring is connected.
Contact Person: Andrew
Address: No.20 Tianshun Road, Industrial Park of Yangshan Town, Huishan, Wuxi, Jiangsu, China
Factory Address:No.20 Tianshun Road, Industrial Park of Yangshan Town, Huishan, Wuxi, Jiangsu, China