Popular Type Wireless Remote Control Grab Bucket For Loading Bulk Cargo

Product Description
 
OUCO remote control grab bucket whose transmitter can be operated up to a max distance of 100 meter from the grab, which is fitted with remote control receiver. The grab can be operated approx 30 days before the batteries need to be charged.
 

Work theory

The remote control grab controls the opening and closing of the remote grab by opening and closing the main cylinder solenoid valve. When the slip block slides down to the lower bolster, the slip block is integrated with the lower bolster, and the grab can grab the cargo. When it is necessary to open the grab, press the remote control transmitter to control the solenoid valve to be energized, the hydraulic system oil circuit is opened, the slip block is separated from the lower bearing beam, and the grab is opened to release the cargo. At the same time, the sliding block moves up and collides with the upper bolster. After a delay, the solenoid valve is closed to prepare for the next operation.

Closing Cycle:

When the grab is opening, the moving board is connecting with top roof beam,and separate with down roof beam, at the that time, the hydraulic circuit system is opening, and the piston of hydraulic vat was pulled out by moving board, when grab the goods, the hook of the crane go down, the moving board go down along the hydraulic vat with the piston of the cylinder, when the moving board touch the stroke switch on the down roof beam, the stroke switch stop the eleclromagnetism valve to stop the hydraulic oil . The hook of the crane goes up with moving board and down roof beam, to make the grab close.

Opening Cycle:

Press the radio switch, send the message to the receiver, then the electromagnetism valve open the hydraulic circuit system, the hydraulic vat was extended because of the gravity of goods and down roof beam, the down roof beam was separated from moving board, to make the grab open , and the grab can do the next closing cycle.

Technical Parameters

 
 
FAQ
1. Q:In the material, how should we choose and determine?
A:The selection of the material of the grab edge plate, generally speaking, is the use of high strength wear-resistant steel plate.
2. Q:Electric grab, its use in the process should pay attention to what aspects?
A:In use process, should pay attention to the wire rope and the important parts, because, if the improper use of words, then, the prone to breakage, so we must have enough attention.
3. Q:Which is an important way to improve service life?
A:The important way to improve the service life of the grab bucket is to improve the abrasion resistance of the grab pin and shaft sleeve, and to improve the abrasion resistance of the blade of the bucket body.
4. Q: The type of grab and its span size, whether will affect the grab price?
A:The type of grab, such as the hook or double hook, will affect the price of the grab, because the type is different, then the corresponding price is also different. As for the span of the grab, it is also one of the factors affecting the price of the grab, so it will certainly have an impact.
 
Transportation